ACER B286HK User Manual

LCD monitor  
$ꢀꢁꢂ*-  
External controls  
1&2  
Power button Turns the monitor on/off. Blue indicates power on. Amber indicates  
standby/ power saving mode.  
3&4 </>  
Minus / Plus  
If the OSD is active, press the Minus or Plus buttons to toggle between  
the OSD options. If the OSD is inactive, press the Minus or Plus buttons to  
adjust the volume. (Optional)  
5
Menu OSD functions Press to view the OSD. Press again to enter a selection in the OSD.  
picture in  
Use the PIP hotkey to active the pictureinpicture function.  
6
PIP  
hotkey  
picture  
Empowering  
Key  
a. When the OSD menu is active, this button will act as the exit key ( exit  
7
OSD menu).  
b. When the OSD menu is inactive, press this button to select scenario  
mode.  
Regulations and safety notices  
FCC notices  
This device has been tested and found to comply with the limits for a Class B digital device pursuant  
to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against  
harmful interference in a residential installation. This device generates, uses, and can radiate radio  
frequency energy and, if not installed and used in accordance with the instructions, may cause  
harmful interference to radio communications. However, there is no guarantee that interference  
will not occur in a particular installation. If this device does cause harmful interference to radio  
or television reception, which can be determined by turning the device off and on, the user is  
encouraged to try to correct the interference by one or more of the following measures:  
ꢀꢁ  
ꢀꢁ  
ꢀꢁ  
ꢀꢁ  
Reorient or relocate the receiving antenna.  
Increase the separation between the device and receiver.  
Connect the device into an outlet on a circuit different from that to which the receiver is connected.  
Consult the dealer or an experienced radio/television technician for help.  
CE declaration of conformity  
Hereby, Acer Inc., declares that this LCD monitor is in compliance with the essential requirements  
and other relevant provisions of EMC Directive 2004/108/EC, Low Voltage Directive 2006/95/EC, and  
RoHS Directive 2011/65/EU and Directive 2009/125/EC with regard to establishing a framework for  
the setting of ecodesign requirements for energy-related product.  
Notice: Shielded cables  
All connections to other computing devices must be made using shielded cables to maintain  
compliance with EMC regulations.  
Notice: Peripheral devices  
Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with the Class B  
limits may be attached to this equipment. Operation with non-certified peripherals is likely to result  
in interference to radio and TV reception.  
Caution  
Changes or modifications not expressly approved by the manufacturer could void the user  
authority, which is granted by the Federal Communications Commission, to operate this product.  
Operation conditions  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two  
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any  
interference received, including interference that may cause undesired operation.  
Notice: Canadian users  
&$1 ,&(6ꢀꢁꢂ%ꢃꢄ10%ꢀꢁꢂ%ꢃ  
Disposal of waste equipment by user in private household in the European Union  
This symbol on the product or on its packaging indicates that this product  
must not be disposed of with your other household waste. Instead, it is your  
responsibility to dispose of your waste equipment by handing it over to a  
designated collection point for the recycling of waste electrical and electronic  
equipment. The separate collection and recycling of your waste equipment at  
the time of disposal will help to conserve natural resources and ensure that it is  
recycled in a manner that protects human health and the environment. For more  
information ab ut where you can drop off your waste equipment for recycling,  
please contact your local city office, your household waste disposal service or the  
shop where you purchased the product.  
Warning Message for Magnet  
Certain electronic devices such as hard drives, USB devices, tablet computers,  
laptops, cellphones, watches, earphones, speakers, credit cards, magnetic ID  
cards, etc. are sensitive to magnetic fields and may be damaged permanently  
or temporarily disabled if exposed to a magnetic field that is too strong.  
Magnet  
Electronic devices should not be put close to or directly on the magnetic  
area of monitor base.  
SPECIFICATION  
Driving system  
Size  
TFT Color LCD  
28"Wꢀ ꢁꢂꢃ  
71  
Pixel pitch  
Brightness  
Contrast  
0.16mm(H) x 0.16mm(V)  
300cd/m2(Typical)  
100,000,000:1Max. (ACM)  
170° (H) 160° (V) (CR=10)  
LCD Panel  
Viewable angle  
Response time  
Panel Type  
Video  
1ms (G to  
TN  
G)  
Digital Interface  
DVI/HDMI:30KHz~99KHz  
23-80Hz  
H-Frequency  
V-Frequency  
DP:30~160KHz  
Display Colors  
Dot Clock  
1.073G Colors  
DVI/HDMI:300MHz DP:600MHz  
3840 x 2160@60Hz  
VESA DDCCI/DDC2B  
29.0W(typ.)  
Max. Resolution  
Plug & Play  
ON Mode  
Sleep Mode  
Off Mode  
Power consumption  
@200cd/m2  
0.49W(typ.)  
0.37W(typ.)  
DVI-D 24pin (Only Dual-Input Model)  
DisplayPort19pin (Only DP Model)  
MiniDP 19pin (Only MiniDP Model)  
HDMI (Only HDMI Model)  
Input Connector  
USB Hub / USB3.0 x 4 (Only USB Hub Model)  
Digital signal (Only Dual-Input Model)  
DP signal (Only DP/MiniDP Model)  
Input Video Signal  
HDMI signal(only HDMI-Input  
Model)  
Speakers  
2W x 2(Only Audio-Input Model)  
Horizontal:648.9mm  
Vertical:369.3mm  
Maximum Screen Size  
Power Source  
100-240V~, 50/60Hz  
Operating Temp: 5° to 35°C  
Storage Temp: -20° to 60°C  
Operating Humidity: 10% to 85%  
Environmental  
Considerations  
Dimensions  
659 (W) x 409~559(H) x 247(D)mm  
7.80kg Unit (net)  
Weight (N. W.)  
Tilt: -5° to +35°  
Swivel: Yes  
Height adjustment: 150mm  
Pivot: Yes  
Mechanism spec  
Detachable foot stand: Yes (by Release button)  
Power Button  
PIP  
Left(<) /Right(>) E(Empowering) Key  
MENU/ENTER  
Switch / Buttons  
Functions  
Contrast  
Brightness  
RGB Color temperature  
Language  
External  
Controls:  
ACM On\Off  
6-axis Saturate  
6-axis Hue  
Super Sharpness  
(Warm) Color  
(Cool) Color  
OSD timeout  
Input signal Selection (only Dual input model)  
DDCCI On/Off  
Display information  
Reset  
Exit  
* All specifications are subject to change without notice.  
Regulatory Compliance  
R
ꢁꢂ  
LR60441  
ME61  
N214  
R33037  
product on the official Acer support website.  
Find manuals and other documents for your Acer  

Trane Ftxs24dvju User Manual
Soleus Air Gh Pac 10e5 User Manual
MAYTAG MSF25D4MD User Manual
Lexmark All In One Printer 30e User Manual
GARMIN ASUS NUVIFONE G60 User Manual
DELL S2317HJ User Manual
CRAFTSMAN 139.18473D User Manual
BROTHER FAX750 User Manual
BLACK DECKER LST400 User Manual
BLACK DECKER CWV9610 User Manual